My notebook is 5" X 7" and is 1/2" thick. If you are using a different sized notebook, you will need to make adjustments to your piece sizes.
Scrappy Notebook Tutorial
- scraps of neutral fabric for base of cover
- small scraps of colorful fabric for border
- scraps for side pockets and lining of cover
- scrap of batting or felt for inside cover
embroidery supplies, including disappearing ink pen to mark pattern (optional as well)
embroidery pattern. You can find the one I used here, or you can make your own.
- 1- 11 1/4" X 7 3/4" piece for lining of cover
- 2- 5" X 7 3/4" pieces for side pockets of cover- press in half along the length to give you two 2 1/2" X 7 3/4" pieces
- 1- 8 1/4" X 5 3/4" piece from neutral fabric for base of cover
- 1- 1 1/2 " X 5 3/4" piece from neutral fabric for back of pen pocket
- 1- 1 1/2" X 10" piece from neutral fabric for front of pen pocket- press in half along the length to give you a 1 1/2" X 5" piece
- various 4" scraps of colorful fabric cut into widths of 1" to 1 1/2" to be pieced into border. (I used 1", 1 1/4" and 1 1/2" widths, but you can add more or less variety if you like)
- 1- 10 3/4" X 7 1/4" felt or batting for inside cover
- 1- 8" piece of elastic
- 1- 11" piece of ribbon
*we will be using a 1/4" seam allowance throughout
1. Take your scraps of colorful fabric and piece together in strips.
2. Press your strips, with the seam allowance open
4. Now we are going to begin building the front of our cover. Take your 8 1/4" X 5 3/4" neutral piece of fabric and place it face up on your work surface. Now place the 1 1/2" X 10" piece (that is pressed in half) on top of the 1 1/2" X 5 3/4" piece- lining up the bottom and sides. Place this pocket face down on the right side of the larger piece.
6. Take your two 5 3/4" X 2" strip pieces and pin and sew them to the two short sides of your cover piece. Press seam allowances toward the pieced borders.
8. Take the 11 1/4" X 2" border pieces and sew them to the top and bottom of the cover piece. Again press seams toward the pieced borders and trim borders to 1 1/4".
9. Prepare your piece for embroidery. Using a light box or window center your sentiment on the right half of your neutral piece. I used a pencil, but if you aren't comfortable with that, use a water soluble pen to mark your pattern.
10. Center your felt or batting on the wrong side of your notebook cover and baste in place with pins. Sew around the border to hold the batting in place. In the picture above you can see I did two rows of stitching- one at the edge of the border and another 1/4" away from that.
11. Embroider your design into the cover.
Assembling the cover:
1. Place your cover front face up in front of you on your work surface.
2. Line the elastic up along the left seam between the neutral fabric and pieced border.
3. Take side pocket pieces and line up raw edges with the outer edges of the front cover.
4. Center ribbon on the top edge of the front cover.
6. Sew around all sides of the cover, leaving an opening on the bottom to turn the cover right side out, back stitching at beginning and end.
7. Clip corners and turn right side out.
8. Press cover, turning under edges of opening. Sew the opening closed with an edge stitch.
I have tons of covered notebooks, but I think this might be my favorite. I hope you make one of your own!