Monday, April 29, 2013

Mother's Day Giveaway

Monday, April 29, 2013
Sometimes you get a fun opportunity and you just have to get on board.  I have the chance to participate with a bunch of bloggers in a fantastic giveaway:
How about the chance to win a gift for your Mom?  And if that gift just happened to come in duplicate for you?? Even better.

a Rafflecopter giveaway

I would LOVE if one of my readers won! Good luck!!

xoxo,
Amy
The participating bloggers were not compensated for this post.
No purchase is necessary to enter. Void where prohibited by law. The odds of winning are based on the number of entries received.** This promotion is no way sponsored, endorsed or administered by, or associated with, Facebook.** To qualify to win, you must fill out the Entry. See Rafflecopter for complete rules. This giveaway is compliant with Facebook Promotions Guidelines. Must be aged 18+ to enter & win. Valid only in the United States. Void where prohibited by state or national law.

Creating a Custom Roman Shade- a tutorial



It probably goes without saying, but I LOVE fabric.
I love using fabric to add color to my home, and if it does double duty as a functional item?  Bonus!

I love the clean, crisp look of roman shades- plus they are simple to make and can be customized to fit your window and your style.  They are wonderful. 

Today I'm going to show you how to make your own.  I will add a disclaimer that this will require math.  Don't let that scare you- you can totally do this.

The post might feel a bit wordy, but I want to make sure you have the tools to figure out your own window- as the measurements will be different than mine.  Before we begin, there are a couple of other wonderful tutorials out there that I have learned from here and here.  If something is confusing, or you want to see a different way to make it- check them out.

Materials:
  • Fabric
  • Blackout lining- usually found near the utility fabrics in your fabric store. (you don't have to use this, but it won't block as much light if you just use muslin or other fabric- and the sun rot will happen faster with regular fabric)
  • brass rings (again, this helps with the sun rot, but you can use plastic as well)
  • flat metal rod to weight the bottom of the shade (you can find these at your local home improvement store- you could also use a dowel if you need to)
  • Wood to brace the shade to the window casing or wall (I like to use 1"X2")
  • nylon string to pull the shade (along with the brass rings, this can be found in the curtain making section of Joann or Hobby Lobby)
  • screw eye hooks (a round loop with a post with screw threads on it- you will run your string through this)
  • staples and a staple gun (if you have them, if not, you can use flat thumb tacks.
  • Drill and screws for hanging.

The first thing you need to do is measure your window.  You need the height (top to bottom) and width (side to side).  My window was 47" tall by 46 1/4" wide. 
However, since this window is in the basement, I didn't want to install the shade in the window casing like you usually do- I didn't want to lose any of the light in my room.  So, I decided I would mount my shade at the ceiling, so when it is open, all the fabric will hang on the wall and not cover the window.  The added height made my new measurement 65" tall by 46 1/4" wide.

Now for the math.  We need to add seam allowance on the sides, so when we sew the two pieces of fabric together, it will still fit the window.  I am using a 1/2" seam allowance, so I need to add 1" to my width. 
46 1/4" + 1"= 47 1/4"

For the height, we need to add the seam allowance AND enough fabric to wrap around our wood brace that holds the shade up- my brace was a 1"X2" piece of lumber (which actually measures 1/2" X 1 1/2")- so I added 1/2" (seam allowance) + 1/2" (short side of brace) + 1/2" (OTHER short side of brace) + 1 1/2" (one long side of brace)= 4"
65" + 4" = 69"

New measurement for fabric pieces: 47 1/4" X 69"

blackout fabric, home decorator fabric, window treatment
 Probably the hardest part of the whole process (aside from that math stuff) is accurately measuring the pieces of fabric.  The better you do, the more crisp the shade will look in the window.  Press your fabric first and make sure you are working on the largest flat surface you can.  The less you fold the fabric the straighter the cuts will be.
 Cut out your fabric and black out lining to the dimensions you just calculated.

Pin the fabric and lining right sides together.  Sew around 3 sides, leaving the top open.
Now, I'm going to show you a neat trick I learned from one of my readers a long time ago.  It creates neat, crisp corners without clipping fabric.  Are you excited? :)
 First, fold the bottom seam along the sewn line.  Next, fold over the side, also along the sewn line.  Gather up the fabric so you are pinching both sides of the corner together (inside and outside), turn the fabric to the right side, pushing out the corner.

 Presto!  A nice crisp corner.  You may need to use a tool to push it all the way out.  Repeat for the other side.  (I use this method on my pillows as well)

Now that our shade is sewn, we are ready to add the mechanics to make this work.  Decide how you want your shade to hang when it is open.  This is where you will have to fiddle with the measurements until you achieve the look you want.  I like the look of a graduated shade where the pleats gradually get smaller, but if you want a more uniform shade, you can keep the pleats all the same size- just be aware that if your shade is long, it might bunch up with all the folds in the same place.

I wanted my pleats to cover the wall above the window, so my bottom pleat was 15".  I wanted to have the next pleat be just a bit shorter than the last one so it would have a graduated look.  I started with a 13" pleat for the second (just an educated guess).  The pleat is made when two sets of rings are pulled together, to determine how much length of your shade a pleat will need you multiply the desired length of the pleat by 2. (13" X 2= 26").   The height of my finished curtain is going to be 65", if I subtract the two pleats I am left with 24 inches (65-15-26=24)- this will be folded in half to make the final pleat of 12". So my three pleats, when the curtain is open would measure 15", 13" and 12".  In my case it works out pretty well.  The difference between the first and second pleat is 2", and the second pleat is only 1" longer than the third which will work just fine- but if the gaps between the pleats weren't so close, you may need to adjust the size of the pleats to even them out.  If you have any questions at all- please e-mail me or ask in the comments I will do my best to answer them!

 Now that you have the distance for the pleats, decide how many rows of rings you will need.  The more rings  you have the less it will droop (or you can use the dowel method from this tutorial).  I am using 5 rows, I try to keep the space between rows less than 15", but sometimes it's just a number I pick.  The first and last row will be 2" from the side of the shade, then divide the remaining space evenly into the remaining sections you have.

Here is my math:  My shade is 46 1/4" wide.  Two of my rows will be 2" from the sides, taking 4" off the span to be divided- 46"-4"= 42".  Since I am doing 5 rows total, I have 3 rows left to space- leaving 4 sections between them.  42" / 4"= 10 1/2".  My rings will be spaced from left to right: 2", 12 1/2", 23", 33 1/2" and 44".
This is not to scale, but hopefully it will give you an idea of how to space the rings.

Using your measurements for the spacing of the pleats and the rings, mark your fabric where the rings will go.  Sew the rings on at each of the marked spaces, sewing through the lining and curtain fabrics.  Using a seam ripper, make a small hole in one bottom, side corner big enough to allow the metal bar to slide in.


If your shade is as big as mine you may need to recruit help to dry fit the shade to your window.  You want to make sure the bottom rests on the sill, wrap the extra fabric around your wood brace and staple it into place.  (or if you don't have staples, you can use the thumb tacks like I did)  Line up your eye screws with the rings and screw them into the brace.  Tie your nylon strings to each of the bottom rings and singe to keep the knot from fraying.  Run your strings up through the rings and the eye screws to one side (it doesn't matter which side, just determine where you want the strings to come down).
Now we are going to hang the shade.  This part gets a bit tricky, again, it might be nice to have some extra hands- one set to drill in the brace, the other to keep the fabric out of the way.  You will want to find and mark studs if you are putting this on a wall.  If you are hanging it in the window casing, there SHOULD be a header to screw into, but you will want to make sure your shade is anchored well as the tension for pulling it up will put a lot of strain on the brace.

Fit the shade where you want it to go, then lift up the fabric to get to the brace underneath.  Using the appropriate screws and a drill, mount the brace to the wall or window.  All that is left is to mount a cleat or hook to wrap the string around to hold the shade open.
 

Thank you for hanging in there with me.  I could have simplified this a lot, but it wouldn't have given you all the details you'll need to do it yourself.  I know the math might seem scary, but really, it's not too bad.  And, I'm here to answer any questions you might have.
xoxo,
Amy
Linked up to Get Your Craft on at Today's Creative Blog, and linked up to Creative showcase at Housewife Eclectic, Motivate me Monday on Keeping it Simple, Market Yourself Monday at Sumo's Sweet Stuff

Point of View Reveal- Windows

We have been loving this year's theme of creating for the "Spots" in your home.  I hope we've inspired you a little to make some small (or maybe large) changes in your own homes.  This month we are working on Windows- and it was just the excuse I needed to finally make a window covering for my craft room.  Want to see what the other Point of View ladies created?

pov-april-2013-windows  
Each month I see the reveal picture and think- "Why didn't I think of that?"  Such a great variety of inspiration, right?

Are you ready to get more details?  Head over to each of the different tutorials:


My tutorial for creating a Roman Shade is here
Ashlee from I'm Topsy Turvy
Megs from The DIY Divas- our guests this month

And if you've created a windows-related project, please share your own inspiration at the link party:

Have a Happy Monday! XOXO

Tuesday, April 23, 2013

A post-SNAP brain purge {a Mom-day post}

Tuesday, April 23, 2013
I promised a shot of my living room.  This is taken from upstairs looking down.  It got much, much worse. ;)

Last week, after weeks of boutique prep, I had the chance to attend SNAP.  It's a conference for creative bloggers.  It was amazing!  The classes were wonderful, timely and well done.  The schedule was incredible, the sponsors terrific and the party was top notch!  I had a fabulous time connecting with friends new and old and enjoying my time as a person (not a mom) immensely. 

Whenever I attend an event like this, I often feel overwhelmed with the enormity of all that I am NOT doing.  I will admit that my competitive juices start flowing and I feel a strong yearning to be at the TOP of the dog-pile.  My mind races to the list of this' and thats' that I should and could be doing better.  Instagramming, Pinteresting, Facebooking, Tweeting, editing, SEO-ing and so on.  Things that, if I want this blog of mine to grow, need to be done.  I become frantic and frustrated and plain old cross, truth be told.

Then, when I allow the chaos to slow down a bit, I begin to reflect on what my priorities really are.  My family, my home, my friends.  I'm trying to grow a business and raise 5 children- and very honestly- be the Mom, first and foremost.  I realize that all the could do's and should do's are NOT have-to's.  They are nice, and definitely help in the race to become "known", but in the grand scheme of what truly matters in this life, to me, they aren't really important at all.  At the gates of heaven, there is no requirement for a certain number of followers, or likes or page views.
Riley Blake geekly chic wallet with laminate cotton exterior


Creating things helps me be a better mom.  It gives me a place to be a person outside of my children.  It allows me to fulfill needs deep in my heart that allow for me to bring to my family a whole and happy person.  It is something I can't do without finding a way to get it to pay for itself.  Selling my creations not only allows me to perpetuate the creative flow, but brings me satisfaction in a myriad other ways as well. 

Striking a balance in life is a tricky business.  The ebbs and flows are ever changing, creating a need for constant adjustment.  Priorities shift and the focus of our lives moves about as the sun orbits the Earth.  What works one day might need to be adjusted the next.

I am making deliberate choices- some good and some bad.  But all in the attempt to keep at the forefront of my life the things that matter the most to me- my family and my religion.  There are times I don't do such a great job of it- but I am constantly adjusting my life to bring those goals back in line.
Riley Blake geekly chic with laminated cotton

I hope you know how I appreciate your place in my life.  The sharing of comments, the support and encouragement I receive from you cannot be replaced.  You make the time keeping a blog consumes all worth it and I greatly value your place in my life.

Thanks for letting me just purge my brain and my heart.  Sometimes the filters have to come down and I just need to throw it out there. :)  Thanks for being that place for me.

xoxo,
Amy

linked up to Look What I made Wednesday at Creations by Kara

Friday, April 12, 2013

Status report

Friday, April 12, 2013
I kept putting off making these pillows in multiple colors, and now I can't believe it's taken me so long!  I love every single one of them, even if this picture does reveal my complete inability to take decent pictures.  The tangerine one does not glow- despite what the picture might lead you to believe. :)

Wallet making is reaching a fever pitch around here.  Especially when you have delightful colors like this delicious yellow chevron!  I only bought 1 yard of it, and I'm sure it won't be enough to satisfy me.  I hope I can get more, otherwise the 12 wallets I'll get out of what I have will just have to do.

 
The crisp clean look of yellow + navy + gray is just delightful and refreshing.  I adore this wallet- in both the yellow and navy exterior.

I had been toying around with the idea of making mini scrap buntings and SNAP was the perfect excuse.  I am thinking I'll give them away as a free gift with purchase at The Queen Bee Market.  Most of them are random and scrappy, but I think we'll be making lots more of the rainbow ones.  There's just something so RIGHT about ROYGBIV.  This one will probably be staying put right there in my craft room. :)

Tomorrow I'll show you pics of my living room.  It looks like a tornado came through a boutique and left all the damage in one room. :)  Oh the joy.  T minus 6 days until show time, but with dentist appointments, volunteer hours, and general prep for the conference, I pretty much have tomorrow and Monday.  Wish me luck.

XOXO,
Amy

Monday, April 8, 2013

Coming up for air {a Mom-day post}

Monday, April 8, 2013
The list is never-ending.

so.
much.
to.
do.

For every item I get finished, there are at least 10 more I need to still do.

Then I got sick.

Then the baby.

No sleep.

not fun.

 I've decided to just keep going.

As hard as I can.

As long as I can.

What gets done, gets done.

The rest will have to wait for another day.

Thanks for hanging in there with me.  I'll try to post pictures of what I'm getting done this week.  I'd love your feedback on them.  But now, I must get back to sewing.  Take advantage of the baby's nap.

Happy Monday.

xoxo,
Amy
Related Posts Plugin for WordPress, Blogger...